home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 1
/
Gold Medal Software Volume 1 (Gold Medal) (1994).iso
/
graphvew
/
vgraf.arj
/
README.VGF
< prev
next >
Wrap
Text File
|
1993-08-13
|
3KB
|
107 lines
August 15, 1993
RELEASE NOTES FOR VGRAF.EXE
READ THIS FILE COMPLETELY BEFORE ATTEMPTING TO USE THIS PROGRAM
ATI TECHNOLOGIES INC
33 Commerce Valley Drive East
Thornhill, Ont.
CANADA. L3T 7N6
Head Office, Sales and Marketing ....... (416) 882-2600
Customer Support ....................... (416) 882-2626
FAX .................................... (416) 882-2620
ATI BBS ................................ (416) 764-9404
Compuserve ............................. GO ATITECH
GENERAL INQUIRIES.................. 76004,3656 (Attention Corilee Fox)
Contents
1.0 Introduction
2.0 Requirements
3.0 Installation
4.0 Errors
5.0 Reporting Problems
1.0 Introduction
VGRAF is a utility to view TARGA (tm) or AutoDesk Animator files on an
ATI accelerator based graphics product. TARGA file format types of 1,
2, 9, and 10 are supported up to a maximum resolution of 1280x1024.
This includes uncompressed, RLE compressed, and colormapped 16 or 24
bit per pixel images. See VGRAF.TXT for operation details or run
VGRAF with no command options and press F1 to view the help file.
2.0 Requirements
An ATI accelerator card (mach8 or mach32 based) with a minimum of 1MB
of video memory.
3.0 Installation
This program requires no special install procedures except for properly
installing the ATI accelerator card with its supplied INSTALL.EXE program.
The resolutions and color depths available will depend on the capability
of the video card and how it is installed.
4.0 Errors
The supported resolutions and color depths are dependant on the video
card capability (memory, DAC type, chip set) and how it is installed
(determined by the video card's INSTALL.EXE program). This program
should not be executed in an environment which uses accelerator modes of
the video card (i.e Windows, OS/2 which uses an accelerator driver).
5.0 Reporting Problems
TECHNICAL SUPPORT
If you come across any problems, they may be reported to ATI's Technical
Support department by phone, fax, or Compuserve.
WARNING! ATI is not responsible for any problems resulting from the use
of this software.
PROBLEM REPORT FORM
Please complete this form and return it to ATI Technologies Inc. at the
address or fax number listed previously, or return via CompuServe.
Please attach C-INFO output to all problem reports submitted. Use a
separate form for each problem being reported.
ATI Technologies Inc.
33 Commerce Valley Drive East
Thornhill, Ontario
CANADA. L3T 7N6
FAX: (416) 882-2620
Product Name:
Rev. Number:
Customer Name:
Compuserve Address:
Fax Number:
Address:
My Hardware is Configured as follows:
CPU/Speed:
Hard Disk Space:
Memory:
Video Adapter (Make and Model): BIOS #:
Audio Adapter (Make and Model);
CD-ROM Drive (Make and Model):
Software:
Other system/software Information:
Problem description:
Impact of problem:
If you are sending any dumps, test cases or documentation associated with
this problem, list them here: